当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:架子应沿高度由下而上连续设置剪力撑,剪力撑宽度宜为3—5个立杆纵距,斜杆与地面夹角宜为45°—60°范围。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
架子应沿高度由下而上连续设置剪力撑,剪力撑宽度宜为3—5个立杆纵距,斜杆与地面夹角宜为45°—60°范围。
问题补充:

  • 匿名
2013-05-23 12:21:38
Continuous along the height of bottom shelf should be set to cut Supporter, Supporter width should be cut to 3-5 from the pole vertical, oblique angle with the ground rod should be of 45 ° -60 ° range.
  • 匿名
2013-05-23 12:23:18
Shelves should be set straight shear shoring along height from bottom width, shear shoring up to par 3 - 5 months away from a vertical slash, it is desirable to the ground at an angle of 45 degrees and 60 degrees.
  • 匿名
2013-05-23 12:24:58
The rack should along continuously establish the shearing force brace, the shearing force supports the width suitable is highly from bootom to top 3-5 erecting pole latitude, the strut and the ground included angle suitably for 45°-60° the scope.
  • 匿名
2013-05-23 12:26:38
Shelf along the height from the bottom up continuous shear braces, shear braces for 3-5 upright width should be latitude, tilt rods and angle between the ground suitable for 45 °-60 ° ranges.
  • 匿名
2013-05-23 12:28:18
Continuous along the height of bottom shelf should be set to cut Supporter, Supporter width should be cut to 3-5 from the pole vertical, oblique angle with the ground rod should be of 45 ° -60 ° range.
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭