|
关注：1
2013-05-23 12:21
求翻译：如果线距在某一范围内，溢胶量和水平流动均不足以填充，则最易在如图6的位置出现缺胶分层区。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
如果线距在某一范围内，溢胶量和水平流动均不足以填充，则最易在如图6的位置出现缺胶分层区。
问题补充： |
|
2013-05-23 12:21:38
If the line spacing within a certain range, Resin Flow and level of liquidity are not enough to fill, then the most likely to occur in the position shown in Figure 6 lack of plastic layered zone.
|
|
2013-05-23 12:23:18
If line spacing in a particular context, resin flow flow and level are insufficient to fill, the most vulnerable in the location shown in figure 6a vacancy plastic stratified district.
|
|
2013-05-23 12:24:58
If the line-spacing in some scope, overflows the rubber quantity and the forward flow is insufficient to fill, then positions appears easily in like Figure 6 lacks the rubber lamination area.
|
|
2013-05-23 12:26:38
If the line spacing in a range, overflow and level flows are not sufficient to fill, you most likely where there was a shortage of rubber hierarchy in Figure 6.
|
|
2013-05-23 12:28:18
If the line spacing in a range, overflow and level flows are not sufficient to fill, you most likely where there was a shortage of rubber hierarchy in Figure 6.
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
