求翻译：在此模式中，所有的以太网端口一起桥和无线客户端将连接到 ISP 接入点。启用 NAT 和个人电脑的以太网端口共享同一 IP 两个 ISP 通过无线局域网。您必须首先设置为客户端模式下的无线和连接到 ISP AP 在现场勘察页。连接类型可以由安装在湾页中使用 PPPOE 客户端、 DHCP 客户端，L2TP 的 PPTP 客户端或静态 IP。是什么意思？

In this mode, all Ethernet ports with bridge and wireless client will connect to ISP access point. Enable NAT and PC's Ethernet port to share the same IP to two ISP through wireless LAN. You must first set the mode for the client to connect to the ISP AP wireless and on-site survey page. Connection

In this mode, all Ethernet ports and wireless client bridge will connect to the ISP access point. Enable NAT and PC's Ethernet ports share the same IP two ISP via wireless LAN. You must first set to client mode wireless and connect to the ISP AP page in the site inspections. type of connection can b

In this pattern, all ethernet port together bridge and the wireless client side will connect the ISP junction point.Begins using NAT and personal computing ethernet port sharing identical IP two ISP passes the wireless local area network.You must first establish for the client side pattern under wir

In this mode, all together with the Ethernet port of the bridge and the wireless client will connect to the ISP access points. Enabling NAT and PC Ethernet ports share the same IP two ISP through wireless LAN. You must first set up as a wireless client mode and connections to ISP AP site survey page

In this mode, all together with the Ethernet port of the bridge and the wireless client will connect to the ISP access points. Enabling NAT and PC Ethernet ports share the same IP two ISP through wireless LAN. You must first set up as a wireless client mode and connections to ISP AP site survey page