求翻译：你说的直径尺寸不一样，就是直径是2的实测公差是-0.02，但图纸是-0.01，对吗？另外一边直径是1,68的没问题吧，是否我重新给你寄样品，确认后再生产，还是按图纸就把产品生产下来是什么意思？

You say not the same diameter, the diameter is measured tolerance of 2 is -0.02, but the drawings are -0.01, right? Diameter is 1,68 the other side of it no problem, if I re-send you samples to confirm and then production, or put the product down by drawing

You have said that the diameter size diameter is not the same, and that is the real measurement tolerances is 2 - 0.02 -0.01 , but drawings is, isn't that right? Another side of diameter is 1, and 68, you ll come back to me whether or not to confirm if you send samples or the drawings produced on th

You said the diameter size is dissimilar, is the diameter is 2 actual common differences is - 0.02, but the blueprint is - 0.01, to? Moreover one side the diameter is 1,68 not questions, whether I do send the sample again to you, after confirmed reproduces, presses the blueprint on the product produ

You say the diameter dimension is different, is the measured tolerances of a diameter of 2 is-0.02, but drawing was-0.01, right? While diameter is 1,68 I'll whether I sent you samples, confirmed production or by drawing down production

You say the diameter dimension is different, is the measured tolerances of a diameter of 2 is-0.02, but drawing was-0.01, right? Other side the diameter is 1,68 is no problem, if I send you samples, confirmed production, or by drawing down production