|
关注：1
2013-05-23 12:21
求翻译： Figure 5 shows the typical cross section of a drilled hole using the thermal friction drilling process. From the drilled hole cross section, the BL of the drilled hole is near 3 times of the specimen thickness. The bush can provide a longer contact area which can sustain a shaft firmly, and it also can be taped to 是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Figure 5 shows the typical cross section of a drilled hole using the thermal friction drilling process. From the drilled hole cross section, the BL of the drilled hole is near 3 times of the specimen thickness. The bush can provide a longer contact area which can sustain a shaft firmly, and it also can be taped to
问题补充： |
|
2013-05-23 12:21:38
图5示出了使用热摩擦钻孔过程中钻孔的典型横截面。
|
|
2013-05-23 12:23:18
正在翻译，请等待...
|
|
2013-05-23 12:24:58
图5使用热量摩擦钻过程显示一个操练的孔的典型的横断面。 从操练的孔横断面，操练的孔的BL是在标本厚度附近的3次。 灌木可能提供可能牢固地承受轴的一个更长的联系范围，并且它在板材可以也录音创造一个内部螺丝，无需特别是焊接一枚坚果在用机器制造的孔之下。它在航空航天和汽车制造业可能广泛地减少加入组分复杂的规程。而且，操练的孔的墙壁表面显露镜子般的质量。
|
|
2013-05-23 12:26:38
正在翻译，请等待...
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
