|
关注：1
2013-05-23 12:21
求翻译：Since the circuit breaker design becomes more complicated with parallel resistors. Damage due to malfunction in parallel resistors has occurred several times[8-10]. Many researchers are studying how to reduce overvoltages without parallel resistors. For this reason, the simulations were also done without parallel resis是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Since the circuit breaker design becomes more complicated with parallel resistors. Damage due to malfunction in parallel resistors has occurred several times[8-10]. Many researchers are studying how to reduce overvoltages without parallel resistors. For this reason, the simulations were also done without parallel resis
问题补充： |
|
2013-05-23 12:21:38
因为断路器的设计变得更复杂，并联电阻。由于并联电阻器发生故障损坏已发生数次[8-10]。许多研究人员正在研究如何降低过电压无并联电阻。因为这个原因，模拟还没有进行并联电阻与图中所示的结果。 2和3。
|
|
2013-05-23 12:23:18
因为开关设计变得复杂与平行的电阻器。由于的损伤发生故障电阻器平行发生了几次[8-10]。许多研究员学习如何减少超电压，不用平行的电阻器。为此，模仿也完成，不用有在Figs.显示的结果的平行的电阻器2和3。
|
|
2013-05-23 12:24:58
正在翻译，请等待...
|
|
2013-05-23 12:26:38
由于断路器设计变得更加复杂与平行电阻器。由于损坏故障并行电阻器已发生几次 [8-10]。许多研究人员正在研究如何减少无并行电阻过电压。出于此原因，图 2 和 3 所示的结果无并行电阻也做了模拟程序。
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
