|
关注：1
2013-05-23 12:21
求翻译：Sample Preparation. iPP and β-nucleating agent were mixed in a two-roll mill at 190 °C for 6 min and then molded into 1 mm thick sheets. The concentrations of the nucleating agent were 0.05, 0.08, 0.1, 0.3, 0.6, and 1 wt % and the samples were designated as PP1, PP2, PP3, PP4, PP5, and PP6, respectively. The pure iPP s是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
Sample Preparation. iPP and β-nucleating agent were mixed in a two-roll mill at 190 °C for 6 min and then molded into 1 mm thick sheets. The concentrations of the nucleating agent were 0.05, 0.08, 0.1, 0.3, 0.6, and 1 wt % and the samples were designated as PP1, PP2, PP3, PP4, PP5, and PP6, respectively. The pure iPP s
问题补充： |
|
2013-05-23 12:21:38
正在翻译，请等待...
|
|
2013-05-23 12:23:18
Sample Preparation . iPP and beta-nucleating agent were mixed in a two-roll mill at 190 °C for 6 Min and then molded into 1mm thick sheets . The concentrations of the nucleating agent were 0.05, 0.08, 0.1, 0.3, 0.6, and 1 wt % and the samples were designated as PP 1, PP 2, PP 3, 4 PP PP, 5, and 6 PP
|
|
2013-05-23 12:24:58
样品准备。 iPP和β-nucleating的代理在被混合了二滚动磨房在190 °C 6分钟然后铸造入1毫米厚实的板料。 nucleating的代理的集中是0.05， 0.08， 0.1， 0.3， 0.6，并且1 wt %和样品被选定了作为PP1， PP2、PP3、PP4、PP5和PP6，分别。 纯净的iPP样品被选定作为PP0为比较也准备了。
|
|
2013-05-23 12:26:38
样品制备。iPP β 成核剂混合在二辊轧机在 190 ° C 为 6 分钟，然后模塑成 1 毫米厚床单。成核剂浓度 0.05、 0.08、 0.1、 0.3、 0.6、 和 1 wt %，样品被指定为 PP1、 PP2、 PP3、 PP4，PP5 和序言段 6，分别。指定为 PP0 也准备比较纯 iPP 示例。
|
|
2013-05-23 12:28:18
Sample Preparation . iPP and beta-nucleating agent were mixed in a two-roll mill at 190 °C for 6 Min and then molded into 1mm thick sheets . The concentrations of the nucleating agent were 0.05, 0.08, 0.1, 0.3, 0.6, and 1 wt % and the samples were designated as PP 1, PP 2, PP 3, 4 PP PP, 5, and 6 PP
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
