求翻译：1、弹簧一端有定位；2、弹簧高度要相同，且测量弹簧的弹性系数；3、膜片O型圈使用耐高温耐油材料；4、油漆使用粉末烤漆；5、支架采用精铸件喷砂；6、膜头钢板应采用喷砂除锈后再喷漆；7、导向套应在下端加一个铜套导向。是什么意思？

Spring at one end positioning; 2, the height of the spring to be the same, and to measure the modulus of elasticity of the spring; 3, diaphragm o-ring temperature oil-resistant material; 4, the paint powder paint; stent using precision castings sandblasting; 6 film head steel should be used sandblas

1, there is the spring end; 2, spring height are the same, and the measurement of the modulus of elasticity; spring 3, diaphragm O-ring using a high temperature resistant material; 4, oil paint with a powder paint finish; 5, stands a fine Casting sand blasting; 6, film and sheet steel should be used

1st, a spring end has the localization; 2nd, the spring must be same highly, also surveys the spring the elasticity coefficient; 3rd, the diaphragm O circle uses the thermostable oil resistant material; 4th, paint use powder baking varnish; 5th, the support uses the fine casting sand blasting; 6th,

1, and spring end has positioning; 2, and spring height to same, and measurement spring of elastic coefficient; 3, and diaphragm o type ring using resistance high temperature resistance oil material; 4, and paint using powder roast paint; 5, and bracket used fine casting spray sand; 6, and film head

正在翻译，请等待...