当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:硅胶条,在使用一年左右,如硅胶与封口刀的接触面出现一条凹槽时,则需要更换硅胶条了,为了延长硅胶条的寿命硅胶条表面要贴2层高温胶布,第一层高温胶布损坏后马上更换,尽量不要损坏第二层,若第二层也损坏了必须一起更换,保证不会伤到硅胶条。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
硅胶条,在使用一年左右,如硅胶与封口刀的接触面出现一条凹槽时,则需要更换硅胶条了,为了延长硅胶条的寿命硅胶条表面要贴2层高温胶布,第一层高温胶布损坏后马上更换,尽量不要损坏第二层,若第二层也损坏了必须一起更换,保证不会伤到硅胶条。
问题补充:

  • 匿名
2013-05-23 12:21:38
Silicone, in a year or so of use, such as silicone sealing knife contact surface, a groove, you will need to replace the silicone strip, in order to extend the life of the silicone strip Silicone strip surface layer of high temperature tape to paste, the first layer of high temperature tape immediat
  • 匿名
2013-05-23 12:23:18
In silicone, use about a year, such as silicone seal to the surface a notch, you need to replace the silicone piece in order to extend the life of silicone silicone surface to article 2 high temperature adhesive tape, the first high temperature tape damage as soon as it is, try not to damage the lay
  • 匿名
2013-05-23 12:24:58
The silicon block glue, in uses about for a year, when the silica gel and the seal knife contact face appears a scoop channel, then needed to replace the silicon block glue, in order to lengthen the silicon block glue the life silicon block glue surface to have to paste 2 high temperature adhesive p
  • 匿名
2013-05-23 12:26:38
Silicone article, in using a years around, as silicone and sealing knife of contact surface appears a article au slot Shi, is needs replaced silicone article has, to extended silicone article of life silicone article surface to posted 2 layer high temperature blanket, first layer high temperature bl
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭