求翻译：垂直度及水平度是否合格。在检查验收过程中，要特别注意扣件的紧固程度，扣件并不是拧得紧越好。对于拧紧力矩大于70N•m的扣件，要认真检查有无裂缝、变形，如果发现有上述弊病应立即调换，调上的扣件的螺栓应紧固在40~70N•m。是什么意思？

The verticality and levelness whether qualified. Inspection and acceptance process, paying particular attention to the degree of tightening of fasteners, fastener is not screwed tight grip as possible. Greater than 70n • m fastener tightening torque to carefully check for cracks, deformation, if the

Vertical and horizontal scale. In the acceptance process, with particular attention to fasteners, and the tightness of the fasteners are tight and not the better. Tightening torque for more than 70 M N • The fasteners, you want to carefully check that there is no crack, warp, and if there were such

Verticality and levelness is whether qualified.In the inspection course of receiving, must pay attention specially buckles a tight degree, buckles is not twists tightly better.Regarding screws tight the moment of force to be bigger than 70N•m buckle does, whether there is have to inspect the crack,

Vertical and horizontal degree is qualified. In the course of inspection and acceptance, paying special attention to fastener tightening level, better the fastener is not screwed tight. Tightening torque than 70N · m fasteners, you should carefully check for cracks, deformation, and should be change

正在翻译，请等待...