|
关注：1
2013-05-23 12:21
求翻译：工厂保证：两侧的间隙小于1mm；对角线测量主工作台的平面度小于1.2mm（如下图）是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
工厂保证：两侧的间隙小于1mm；对角线测量主工作台的平面度小于1.2mm（如下图）
问题补充： |
|
2013-05-23 12:21:38
The factory guarantee: on both sides of the gap is less than 1mm; diagonal measurement of the main table flatness of less than 1.2mm (as shown)
|
|
2013-05-23 12:23:18
factory warranty: two sides of the gap is less than 1 mm; diagonal measurement of the primary table flatness less than 1.2 MM (picture below)
|
|
2013-05-23 12:24:58
Factory guarantee: The both sides gap is smaller than 1mm; The diagonal line surveys the host work table flatness to be smaller than 1.2mm (the following chart)
|
|
2013-05-23 12:26:38
Factory guarantee: on either side of the gap is less than 1mm; diagonal measurement of flatness of the primary table is less than 1.2mm (below)
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
