当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:即此底板最多只能控制28路灯,N_S-B32.PCB和N_S-B36.PCB分别为32和36路底板,此处由于控制器上灯的数量在28路以内,采用28路底板,所以以28路地板为例是什么意思?

待解决 悬赏分:1 - 离问题结束还有
即此底板最多只能控制28路灯,N_S-B32.PCB和N_S-B36.PCB分别为32和36路底板,此处由于控制器上灯的数量在28路以内,采用28路底板,所以以28路地板为例
问题补充:

  • 匿名
2013-05-23 12:21:38
This backplane can only control 28 street lights n_s-b32.pcb and n_s-b36.pcb were 32 and 36 floor, where the number of the controller the lights within 28 Road, 28 Road backplane 28-way floor for example
  • 匿名
2013-05-23 12:23:18
This backplane is only up to 28 lights, and control the N B S - 32 and N PCB . The B S - 36 to 32, respectively.PCB router backplane board and 36 here, because the controller is the upper number in less than 28 Road, a 28-way base plate 28, and so to the floor for example
  • 匿名
2013-05-23 12:24:58
Namely this ledger wall are most only can control 28 street lights, N_S-B32.PCB and N_S-B36.PCB respectively is 32 and 36 groups ledger walls, here because the controller lights a lamp quantity in 28 groups, uses 28 groups ledger walls, therefore take 28 groups floors as the example
  • 匿名
2013-05-23 12:26:38
This bottom up control only 28 lamps, N_S-B32. PCB and N_S-B36. PCB backplane, 32 and 36 respectively road, because the number of lights on the controller here in less than 28, 28 floor, so a case of 28 floors
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭