求翻译：对缺陷部位加以整修，同时对两侧锁口用一块同型号长2～3m的短桩作通过试验，以2～3人拉动通过为宜。钢板桩基本使用新的，逐根进行检查，检查锁口和桩身的平整度。对于锁口已打坏且无法修正的、桩身扭曲变形的应弃之不用。是什么意思？

Defective parts to be refurbished, with a through experiments with the model length 2 ~ 3m of piling on both sides of the locking, 2 to 3 people to pull through appropriate. The basic use of new steel sheet pile, to be checked by the root, check the flatness of the locking and pile. Locking broke an

In the defect area to be renovated, and two side locks to a block used to model long 2 to 3 m of piling through the test, in order to make 2 to 3 pull through. basic use of the new steel piles, one by one, check out port and pile of flatness. For lock port has been damaged and cannot be amended, the

Renovates to the flaw spot, simultaneously closes up an opening to the both sides with the same-type bugler corporal 2~3m stub does together through the experiment, draws take 2~3 people passes suitably as.The steel sheet pile uses basically newly, carries on the inspection by the root, the inspecti

To renovation the defect parts, lock on both sides at the same time with a model with the longer 2~3M short pile through experimentation, suitable to 2~3 pull through. Basic use of steel sheet pile of the new, check one by one, check the lock and piles of flatness. Lock is broken and cannot be amend

正在翻译，请等待...