当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:把主电机编码器线W11508也穿过机身后侧金属走线槽及机脚方孔,与主电机编码器的圆插头连接起来,拧紧,然后嵌入下方的两个PVC管卡里,用扎带把插头扎在两个PVC管卡中间的元宝座上。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
把主电机编码器线W11508也穿过机身后侧金属走线槽及机脚方孔,与主电机编码器的圆插头连接起来,拧紧,然后嵌入下方的两个PVC管卡里,用扎带把插头扎在两个PVC管卡中间的元宝座上。
问题补充:

  • 匿名
2013-05-23 12:21:38
The main motor encoder line w11508 also through the fuselage rear metal wire tray and machine foot square hole, with the round plug of the main motor encoder connection, tighten, and then embedded in the bottom of the two pvc pipe Cary, with tie band to tie the plug the ingot seat in the middle of t
  • 匿名
2013-05-23 12:23:18
The main motor encoder Line W 11,508 after it passes through the body metal side go machine online slot and pin square hole, and the main motor of the encoder connected to the plug, and tighten, and then embedded in the two lower PVC tube, tie-tie-in to plug two PVC managed the Center on the throne
  • 匿名
2013-05-23 12:24:58
正在翻译,请等待...
  • 匿名
2013-05-23 12:26:38
W11508 main motor encoder cable through the fuselage side metal Cabling Channel and machine foot square hole, round plug connection to the main motor encoders, tighten and then embed below two PVC Guan Kali, strap two PVC pipe plug in the middle of the card of Acer truncatum seat.
  • 匿名
2013-05-23 12:28:18
Also passed through the fuselage rear end metal host electrical machinery encoder line W11508 to walk the trunking and the undercarriage square edged orifice, with the host electrical machinery encoder round forked connection, screws tight, then underneath inserting two PVC tube Cary, grips with the
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭