当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:先把橘色油温传感器及温控线从临时加热装置中断开,然后把油温传感器及温控线都套上一根热缩管,把两根电缆外皮剥去,压好端子;把机身油箱出来的橘色油温传感器线及温控线剪到合适的长度,同样剥去外皮压好端子,然后分别把对应的电缆用红色塑料端子接起来,然后把热缩管罩在端子上,用热风枪吹,直到热缩管收缩包起来。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
先把橘色油温传感器及温控线从临时加热装置中断开,然后把油温传感器及温控线都套上一根热缩管,把两根电缆外皮剥去,压好端子;把机身油箱出来的橘色油温传感器线及温控线剪到合适的长度,同样剥去外皮压好端子,然后分别把对应的电缆用红色塑料端子接起来,然后把热缩管罩在端子上,用热风枪吹,直到热缩管收缩包起来。
问题补充:

  • 匿名
2013-05-23 12:21:38
First orange oil temperature sensor and temperature control lines disconnected from the temporary heating device, the oil temperature sensor and temperature control lines are put on a heat-shrinkable tube, stripped of the rind of the two cables, pressure Good terminals; to cut the fuselage fuel tank
  • 匿名
2013-05-23 12:23:18
First of all an orange oil temperature sensor and temperature control line from the temporary heating units, and then the oil temperature sensor and temperature control line is set on a heat-shrink tubing, and the two cables, peel skin, and pressure terminals; the better the body out of the orange-c
  • 匿名
2013-05-23 12:24:58
  • 匿名
2013-05-23 12:26:38
First to orange color oil temperature sensor and the temperature control line from temporary heating device interrupted opened, then to oil temperature sensor and the temperature control line are sets Shang a root hot shrink tube, to two root cable jacket stripping to, pressure good Terminal; to fus
  • 匿名
2013-05-23 12:28:18
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭