当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:其原理就是将常规抽油泵的固定凡儿设计在泵筒上部,泵筒内的柱塞上,下各有一个游动凡儿,实现柱塞通过下部动力直接驱动,往复运动完成抽汲。如下图:是什么意思?

待解决 悬赏分:1 - 离问题结束还有
其原理就是将常规抽油泵的固定凡儿设计在泵筒上部,泵筒内的柱塞上,下各有一个游动凡儿,实现柱塞通过下部动力直接驱动,往复运动完成抽汲。如下图:
问题补充:

  • 匿名
2013-05-23 12:21:38
The principle is the conventional pump where the children in the top of the pump barrel, the plunger of the pump barrel, each under a swim where the children, to achieve the plunger through the lower part of the power to directly drive the reciprocating motion to complete the swabbing. As shown belo
  • 匿名
2013-05-23 12:23:18
Their theory is that the pump will be the conventional fixed where a child care design on the pump, the pump barrel and top of the plunger in on the next, and the roving where there is a plunger for child care, through the power of reciprocating motion direct drive, complete withdrawals. As shown in
  • 匿名
2013-05-23 12:24:58
Its principle is fixes the conventional oil pump every son design on the pump tube, in on the pump tube plunger, gets down has one to hover respectively every son, realizes the plunger through the lower part power direct drive, the reciprocal motion completes the pump.Following chart:
  • 匿名
2013-05-23 12:26:38
Its principle is a regular pump of fixed design in the upper portion of the pump cylinder, pump barrel columns in North of the Great Wall, where each has a walk under, achieving piston driven directly by a lower power, reciprocating motion complete the swabbing. The following figure:
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭