求翻译：侧模采用大块定型钢模板，钢板厚6mm以上，为拆装方便，模板间采用栓接，模板接头留在设计横隔板位置的中间以便于拆模。相对两侧模板采用拉杆连接，上层每隔1.5m一道，下层每隔1.0m一道。侧模上焊接上固定俯着式振动器用型钢，型钢分上下两层布置，呈锯齿型分布，相邻两台间间距为1.5m左右。是什么意思？

Side of the mold using large fixed steel template, more than 6mm thick steel plate for easy accessibility, the use of bolted between the template, the template fitting place to stay in the middle of the diaphragm design to facilitate form removal. Opposite sides of the template using rod connected t

正在翻译，请等待...

The side form uses the bulk stereotypia steel die board, above steel thickness of slab 6mm, is disassembling is convenient, between the template uses the bolting, the template attachment keeps the design cross spacer position among to be advantageous for the form removal.Each the relative both sides

Side core chunk type steel formwork, steel plate thickness above 6mm, easily reassembled, the templates used to bolt, template headers left over the Middle for easy design of diaphragm location bar mode. Relative side templates using levers connected, upper layer every 1.5m together, underlies every

Side of the mold using large fixed steel template, more than 6mm thick steel plate for easy accessibility, the use of bolted between the template, the template fitting place to stay in the middle of the diaphragm design to facilitate form removal. Opposite sides of the template using rod connected t