求翻译：(5)、在“准备”状态下，手执光纤输出端，对准病灶位置，踩下脚踏开关即有激光输出；松开脚踏开关，激光输出停止。控制面板上“功率”显示值与光纤输出端功率值之间的允许误差值≤±20%；界面下方有“正在发射激光”的提示！！是什么意思？

(5), in the "ready" state, armed with fiber output at the lesion location, the foot switch is depressed that the laser output; release the foot switch, laser output stops. "Power" on the control panel display allowable error value between the value and the fiber output power value ≤ ± 20%; interface

(5) "preparing", in the state, optical output port, and location of the lesion, align the foot switch is a laser output; the foot switch, the laser output is stopped. On the control panel displays a value "power" to the fiber output power values of tolerance value ≤± 20% lower; interface with the la

正在翻译，请等待...

(5), in the "ready" State, hand fiber output, at the focus position, press the foot switch the laser output; release the footswitch, laser output stops. On the control panel "power" between the display and optical output power value of allowable error of ≤ ± 20%; below the interface "is shooting a l

(5), in “the preparation” under the condition, the hand holds the optical fiber out-port, the alignment focus of infection position, steps on treadons the switch namely to have the laser output; Loosens treadons the switch, the laser output stop.Control surface panel “power” demonstration value and