当前位置:首页 » 翻译 
  • 匿名
关注:1 2013-05-23 12:21

求翻译:内法兰管状铆钉铆接接头对剥离负荷的反应比较敏感,所以通过与剪脱强度试验结果相比较,剥离强度较低,铆钉高度和壁厚对铆接接头性能的影响比较明显,在合理范围内,铆钉高度越高,壁厚越小,连接强度相对较大。是什么意思?

待解决 悬赏分:1 - 离问题结束还有
内法兰管状铆钉铆接接头对剥离负荷的反应比较敏感,所以通过与剪脱强度试验结果相比较,剥离强度较低,铆钉高度和壁厚对铆接接头性能的影响比较明显,在合理范围内,铆钉高度越高,壁厚越小,连接强度相对较大。
问题补充:

  • 匿名
2013-05-23 12:21:38
Inner flange tubular rivets riveted joints peel load response is more sensitive to, through and cut off the strength test results compared to low peel strength rivet height and wall thickness of riveted joints performance, within reasonable limits, rivets higher the altitude, the smaller the wall th
  • 匿名
2013-05-23 12:23:18
The flanged tubular rivets riveting to peel off load the joints become more sensitive response, therefore, by cutting off the results of the trial, and peel off when compared with a lower intensity, rivet height and thickness of the riveted lap joints performance impact of more obvious, to a reasona
  • 匿名
2013-05-23 12:24:58
In the flange tubular rivet riveted joint attachment to strips the load the response quite to be sensitive, therefore through and cuts escapes the structural testing result to compare, the peeling intensity is low, the rivet quite is highly obvious with wall thickness to the riveted joint attachment
  • 匿名
2013-05-23 12:26:38
Inner flange on split load of tubular rivet joint response more sensitive, so off with the shear strength test results compared to low Peel strength, rivet high wall thickness and more obvious impact on the performance of riveted joints, within reasonable limits, rivet higher height, wall thickness
  • 匿名
2013-05-23 12:28:18
正在翻译,请等待...
 
 
网站首页

湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区

 
关 闭