|
关注:1
2013-05-23 12:21
求翻译:施焰操作(pic6):拉下玻璃门观察窗,然后按下“启动键”,让燃烧座靠近样品,当运行到施焰点时,自动开始计时,当到了设定的施焰时间后,火焰自动熄灭及燃烧座自动后退,同时“持燃时间”开始计时,待样品火焰熄灭时操作人员立即按下“暂停”键,此时显示的时间便为余焰时间,中途需要停机按“停止”键即可。是什么意思? 待解决
悬赏分:1
- 离问题结束还有
施焰操作(pic6):拉下玻璃门观察窗,然后按下“启动键”,让燃烧座靠近样品,当运行到施焰点时,自动开始计时,当到了设定的施焰时间后,火焰自动熄灭及燃烧座自动后退,同时“持燃时间”开始计时,待样品火焰熄灭时操作人员立即按下“暂停”键,此时显示的时间便为余焰时间,中途需要停机按“停止”键即可。
问题补充: |
|
2013-05-23 12:21:38
Shi Yan operation (pic6): Pull down the glass door viewing window, and then press the "start button", so that combustion is close to the sample, run to the point of Shi Yan, automatically start the timer, to set Shi Yan flame goes off and burning seat back, while holding a burning time "start timing
|
|
2013-05-23 12:23:18
Mr Yan (PIC 6): drop-down the glass door glass, and then press the "Start" button, located near the combustion samples, and when to run automatically when Flame point, start the clock when the flame of the set time, flame combustion and automatically turns off the automatic back and at the same time
|
|
2013-05-23 12:24:58
Executes the flame to operate (pic6): Lags behind the glass door observation window, then presses down “starts the key”, lets the burning place nearness sample, when moves to Shi Yan, starts to time automatically, after arrived the hypothesis to execute the flame time, the flame automatic extinguish
|
|
2013-05-23 12:26:38
Shi Yan operation (pic6): pull Xia glass door observation window, then by Xia "started key", let combustion block near samples, dang run to Shi Yandian Shi, automatically began timing, dang to has set of Shi Yan time Hou, flame automatically goes out and the combustion block automatically back, whil
|
|
2013-05-23 12:28:18
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区