|
关注：1
2013-05-23 12:21
求翻译：策划设计检具时，对卡槽宽度、卡槽距离等非外观性项目，采用通止规、量化检验两种方式控制，要求首件必须读数测量。是什么意思？ 待解决
 悬赏分：1
- 离问题结束还有
策划设计检具时，对卡槽宽度、卡槽距离等非外观性项目，采用通止规、量化检验两种方式控制，要求首件必须读数测量。
问题补充： |
|
2013-05-23 12:21:38
Planning and design submit a non-appearance of the project, the slot width, slot distance, through regulations only quantitative test are two ways to control requirements of the first must be reading measurements.
|
|
2013-05-23 12:23:18
When planning an design of the card, card slot slot width, distance, and other non-appearance of the project, with a compliance inspection, quantify, and two ways to control requirements must be reading first.
|
|
2013-05-23 12:24:58
The plan design examines when has, to the card trough width, the card trough is away from and so on the non-outward appearance project, uses passes stops the gauge, the quantification examines two way controls, requests first to have the reading survey.
|
|
2013-05-23 12:26:38
When planning the design tool, card slot width, card slot non-appearance items, such as distance, flux gauges, quantitative inspection control in two ways, requires first must be measured readings.
|
|
2013-05-23 12:28:18
正在翻译，请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区
