求翻译：关于你收到的S007的样品，因为FPGA和TUSB1210的复位脚不使用的时候连接到高电平，所以，我建议先将FPGA和TUSB1210的复位脚先连接到高电平，同时，将FPGA内部代码配合，测试FPGA跟TUSB1210是否能正常通讯是什么意思？

S007 of the sample you receive connection because when not in use of the fpga and tusb1210-reset feet high, so, I suggest first fpga and tusb1210-reset the feet connect to the high level at the same time, the fpga internal code with test fpga with tusb1210 normal communication

You have received on the 007 The S FPGA samples, for 1210 and TUSB the reset pin is not used to a high-level, so I would suggest that the first 1210 TUSB FPGA and the reset pin to connect to high-level, while the internal code, FPGA FPGA test with TUSB 1210 is able to properly communicate

S007 sample receives which about you, because FPGA and the TUSB1210 replacement foot does not use time connects the high level, therefore, I suggested first connects first FPGA and the TUSB1210 replacement foot the high level, simultaneously, the FPGA interior code coordination, tests FPGA with TUSB

S007 received on your sample, because the Reset PIN does not use FPGA and TUSB1210 when connected to a high level, so I suggest that the first FPGA and TUSB1210 Reset PIN connected to a high level, at the same time, within the FPGA code match, test with TUSB1210 FPGA functionality communication

正在翻译，请等待...